Vibrational energy transfer in O2(X 3sigma(g)-, upsilon=2,3) + O2 collisions at 330 K

Vibrational relaxation of O2(X 3sigma(g)-, upsilon=2,3) by O2 molecules is studied via a two-laser approach. Laser radiation at 266 nm photodissociates ozone in a mixture of molecular oxygen and ozone. The photolysis step produces vibrationally excited O2(a 1delta(g)) that is rapidly converted to O2(X 3sigma(g)-, upsilon=2,3) in a near-resonant adiabatic electronic energy-transfer process involving collisions with ground-state O2. The output of a tunable 193-nm ArF laser monitors the temporal evolution of the O2(X 3sigma(g)-, upsilon=2,3) population via laser-induced fluorescence detected near 360 nm. The rate coefficients for the vibrational relaxation of O2(X 3sigma(g)-, upsilon=2,3) in collision with O2 are 2.0(-0.4)(+0.6) x 10(-13) cm3 s(-1) and (2.6+/-0.4) x 10(-13) cm3 s(-1), respectively. These rate coefficients agree well with other experimental work but are significantly larger than those produced by various semiclassical theoretical calculations.     

Excited-state characters and dynamics of [W(CO)(5)(4-cyanopyridine)] and [W(CO)(5)(piperidine)] studied by picosecond time-resolved IR and resonance Raman spectroscopy and DFT calculations: roles of W --> L and W --> CO MLCT and LF excited states revised

The characters, dynamics, and relaxation pathways of low-lying excited states of the complexes [W(CO)(5)L] [L = 4-cyanopyridine (pyCN) and piperidine (pip)] were investigated using theoretical and spectroscopic methods. DFT calculations revealed the delocalized character of chemically and spectroscopicaly relevant molecular orbitals and the presence of a low-lying manifold of CO pi-based unoccupied molecular orbitals. Traditional ligand-field arguments are not applicable. The lowest excited states of [W(CO)(5)(pyCN)] are W --> pyCN MLCT in character. They are closely followed in energy by W --> CO MLCT states. Excitation at 400 or 500 nm populates the (3)MLCT(pyCN) excited state, which was characterized by picosecond time-resolved IR and resonance Raman spectroscopy. Excited-state vibrations were assigned using DFT calculations. The (3)MLCT(pyCN) excited state is initially formed highly excited in low-frequency vibrations which cool with time constants between 1 and 20 ps, depending on the excitation wavelength, solvent, and particular high-frequency nu(CO) or nu(CN) mode. The lowest excited states of [W(CO)(5)(pip)] are W --> CO MLCT, as revealed by TD-DFT interpretation of a nanosecond time-resolved IR spectrum that was measured earlier in a low-temperature glass (Johnson, F. P. A.; George, M. W.; Morrison, S. L.; Turner, J. J. J. Chem. Soc., Chem. Commun. 1995, 391-393). MLCT(CO) excitation involves transfer of electron density from the W atom and, to a lesser extent, the trans CO to the pi orbitals of the four cis CO ligands. Optical excitation into MLCT(CO) transition of either complex in fluid solution triggers femtosecond dissociation of a W-N bond, producing [W(CO)(5)(solvent)]. It is initially vibrationally excited both in nu(CO) and anharmonicaly coupled low-frequency modes. Vibrational cooling occurs with time constants of 16-22 ps while the intramolecular vibrational energy redistribution from the v = 1 nu(CO) modes is much slower, 160-220 ps. No LF excited states have been found for the complexes studied in a spectroscopically relevant range up to 6-7 eV. It follows that spectroscopy, photophysics, and photochemistry of [W(CO)(5)L] and related complexes are well described by an interplay of close-lying MLCT(L) and MLCT(CO) excited states. The high-lying LF states play only an indirect photochemical role by modifying potential energy curves of MLCT(CO) states, making them dissociative.     

Ciprofloxacin-protected gold nanoparticles

The antibacterial drug ciprofloxacin (cfH) has been used to protect gold nanoparticles of two different mean diameters, 4 and 20 nm. The protection is complete with about 65 and 585 cfH molecules covering 4 and 15 nm particles, respectively. The nature of binding has been investigated by several analytical techniques. The nitrogen atom of the NH moiety of piperazine group binds on the gold surface, as revealed by voltammetric and spectroscopic studies. The cfH-adsorbed particles are stable in the dry state as well as at room temperature, and as a result, redispersion is possible. The rate of release of the drug molecule from the nanoparticles is more in the basic medium than in pure water, and the kinetics depend on the size of the particle; faster desorption is seen in smaller particles. The bound cfH is fluorescent, and this property could be used in biological investigations. This study shows that metal nanoparticles could be useful carriers for cfH and fluoroquinolone molecules. Most of the bound molecules could be released over an extended period of time.     

Non-Template-Centered, Closed Tetravanadium Phosphate and Phosphonate Clusters

Tetranuclear V(III) complexes, [HB(pz)(3)](4)V(4)(&mgr;-C(6)H(5)OPO(3))(4) (I), its acetonitrile solvate (I.4CH(3)CN), and [HB(pz)(3)](4)V(4)(&mgr;-O(2)NC(6)H(4)OPO(3))(4).4C(7)H(8).H(2)O (II), and tetranuclear vanadyl complexes, (t-Bupz)(4)V(4)O(4)(&mgr;-C(6)H(5)PO(3))(4).2H(2)O (III) and (t-Bupz)(5)V(4)O(4)(&mgr;-C(6)H(5)PO(3))(4).4CH(3)CN.0.6 H(2)O (IV), have been prepared and characterized by spectroscopic, magnetic, and electrochemical methods (pz = pyrazole, t-Bupz = tert-butylpyrazole). The use of organic solvents and bulky organic groups as ancillary ligands leads to formation of neutral species instead of the anionic clusters commonly found in the hydrothermal synthesis of vanadium organophosphate/phosphonate systems. Complexes I.4CH(3)CN and IV have also been characterized by single-crystal X-ray diffraction. Crystal data: I.4CH(3)CN, triclinic, P&onemacr;, a = 15.495(3) ?, b = 17.000(3) ?, c = 17.949(4) ?, alpha = 89.17(3) degrees, beta = 86.00(3) degrees, gamma = 78.60(3) degrees, Z = 2; IV, triclinic, P&onemacr;, a = 15.541(3) ?, b = 16.340(2) ?, c = 19.069(5) ?, alpha = 83.58(2) degrees, beta = 79.67(2) degrees, gamma = 63.68(1) degrees, Z = 2. Both are closed clusters, the core structure of the first consisting of a cubane-like arrangement of metal octahedra and phosphate tetrahedra and the core structure of the second consisting of a distorted, collapsed variant of the first. Unlike other vanadium phosphate clusters, these compounds form in the absence of a central, templating agent. As such they represent the simplest form of a closed cluster in which steric forces and cluster connectivity requirements play the primary role in organizing the cluster framework.     

Density functional calculations of NMR chemical shifts and ESR g-tensors

An overview is given on recent advances of density functional theory (DFT) as applied to the calculation of nuclear magnetic resonance (NMR) chemical shifts and electron spin resonance (ESR) g-tensors. This is a new research area that has seen tremendous progress and success recently; we try to present some of these developments. DFT accounts for correlation effects efficiently. Therefore, it is the only first-principle method that can handle NMR calculations on large systems like transition-metal complexes. Relativistic effects become important for heavier element compounds; here we show how they can be accounted for. The ESR g-tensor is related conceptually to the NMR shielding, and results of g-tensor calculations are presented. DFT has been very successful in its application to magnetic properties, for metal complexes in particular. However, there are still certain shortcomings and limitations, e.g., in the exchange-correlation functional, that are discussed as well. Received: 24 October 1997 / Accepted: 19 December 1997     

Characterization of antithrombin III from human plasma by two-dimensional gel electrophoresis and capillary electrophoretic methods

The isoforms distribution of the glycoprotein antithrombin III (ATIII) derived from human plasma was investigated by means of isoelectric focusing (IEF) in polyacrylamide gels with immobilized pH gradients (IPG) and two-dimensional gel electrophoresis (2-DE) as well as capillary electrophoretic methods. It turned out that the presence of high concentrations of chaotropics (urea, thiourea) and zwitterionic detergents (3-[(3-cholamidepropyl)dimethylammonio]-1-propanesulfonate (CHAPS)) was decisive for attaining good resolution of the protein isoforms. Resolution by IPG-IEF was obtained with excellent reproducibility and pI differences down to 0.01 pH units could be distinguished. ATIII-alpha and ATIII-beta-fractions preseparated by heparin affinity chromatography showed an analogous but shifted spot pattern consisting each of one major and three minor isoforms. The main isoforms of ATIII-alpha and ATIII-beta exhibit pI values of 5.18 and 5.32, respectively, both values determined in the presence of high concentrations of urea. The pI difference of 0.14 pH units correspond to the effect of two sialic acids absent in ATIII-beta. The formation and occurrence of ATIII dimers and trimers turned out to be dependent on the sample preparation. The results obtained by 2-DE were compared with those of capillary zone electrophoresis (CZE) and capillary IEF (CIEF). Quantitative analysis regarding the CZE separated isoforms of plasma derived ATIII yielded a content of about 70% ATIII-alpha main isoform and about 6.6% of ATIII-beta. The pI values of ATIII determined by CIEF with internal calibration were in fair agreement with the pI values of the main isoforms achieved with 2-DE.     

Synthesis of beta-lactams from a N-rhenaimine: effect of the transition metal on the energetic profile of the Staudinger reaction

As depicted in the scheme, the alkylidenamido complex 1, a N-rhenaimine, reacts with ketenes to afford the beta-lactams 2-4, which possess a {Re(CO)3(bpy)} fragment as substituent at nitrogen. Clean demetalations using HOTf or MeOTf yield the free beta-lactams or N-methyl-beta-lactams along with [Re(OTf)(CO)3(bpy)]. DFT calculations help to rationalize why the reaction is faster than those of non transition metal N-substituted imines.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Behavior of radiocesium in atmospheric arerosol and fallout in Prague

Radiocesium in ground layer atmospheric aerosol and fallout in Prague has been examined. After a decline in 1986–1988, controlled by a sum of two negative exponentials,¹³⁷Cs aerosol concentration reached a constant level based on an equilibrium between its deposition and resuspension. Deposition velocity was compared to that of⁷Be and²²⁶Ra. It confirmed the supposed source of¹³⁷Cs as resuspension from the ground. Resuspension factor of the order of magnitude of 10^–9 was determined, reminding similar values found earlier in Prague as well as those found in Munich. It also agrees well with the USAEC resuspension model. Solubility of¹³⁷Cs was measured in combined wet and dry fallout. The average undissolved fraction of¹³⁷Cs was found to be about 70% which can be explained by the conditions of the¹³⁷Cs aerosol formation in Chernobyl.     

Exciton diffusion and interfacial charge separation in meso-tetraphenylporphyrin/TiO2 bilayers: effect of ethyl substituents

The photoinduced charge separation efficiency in porphyrin/TiO2 bilayers has been determined using the time-resolved microwave conductivity (TRMC) technique. Porphyrins investigated are unsubstituted meso-tetraphenylporphyrin (TPP) and meso-tetra(4-ethylphenyl)porphyrin (TEPP). TEPP/TiO2 bilayers exhibit a charge separation efficiency per incident photon at the Soret band maximum of 6.2%, which is considerably higher than the efficiency of 1.2% found for TPP/TiO2 bilayers. Exciton diffusion lengths of 7 A for TPP and 75 A for TEPP are obtained from fitting a model for the charge separation efficiency to the experimental data. Optical measurements on the porphyrin derivatives on quartz yield a 20 times higher fluorescence quantum yield and a 7 times higher fluorescence rate constant for TEPP layers as compared to TPP layers. The exciton lifetime of 800 ps found for TEPP layers is considerably longer than the lifetime of 260 ps in TPP layers. The exciton diffusion coefficients, determined from the exciton diffusion length and the exciton lifetime, are found to be 2.10(-9) m(2)/s for TPP and 7.10(-8) m(2)/s for TEPP. The difference is discussed in terms of the presence of face-to-face dimers or larger aggregates in TPP layers.